This beauty has several subtle fades with multiple colors and layers of candy and pearl colors. Tribal flames on top, nose, and sides. Multilayer candy pagan gold traditional flames on lower sides. One of one with detailed lights and logo. RRs up front with sanded tread rears. All with white letter Goodyears!
How about a rare peek at my Blue Blazes FIRE technique??
STEP 1 ~ loose fire added and coated with candy blue.
This layer is the first one and is eventually going to be more of a glow or background when subsequent layers are applied. So it is done loosely, mostly freehand with the nozzle of the airbrush tilted at a 45 degree angle, blowing towards the rear of the casting.
Now I begin adding tighter defined licks with a mixture of AutoAir Wicked detail White, Transparent Base and High Performance reducer. Its almost a milky looking liquid. 2 drops of Detail Blue wicked is added to the mix when in airbrush. I am using a Badger Sotar for this step and HotDawg stencil from FlameMasks.com to create the fire licks.
Adding more fire licks. Notice these licks generally are inside the confines of the first layer but do not follow it completely. The first layer also acts as a “road map” of where the fire will go on in subsequent layers..
And the last of this layers fire licks are done. Notice these licks while more defined than the previous layer, are still a bit wide and loose. This is how each layer should progress. Each layer becoming tighter and more defined than the last while still not following the same paths exactly.
I used a trans parent black to define and “erase” unwanted licks or areas of the 2nd layer fire licks. This should be done with care.
This is the final step for the second layer of fire. Candy blue is applied in several light layers fading from dark to very light towards the front. More layers of candy are applied at the rear than the front, creating a fade in the color.
More layers will be added (usually about 5 to 6 total} after this. Each getting more and more defined than the previous layers. The final two layers should be adding a lot less new licks, but rather add to existing licks. Thise should be small areas where the fire would be the most “hot” if it were really burning. In the last couple layers, remember the old saying “Less..is MORE.”
Fresh Tribal Flame designs tested out on this one. Has multiple colors of candy and pearls, and some multilayer flames nestled in the middle of roof tribal licks.
Fades from Tangelo Pearl to Tangerine Candy over pearl silver on sides. Top goes from light purple to medium blue candy, to Cobalt Blue candy.
I may be adding some more flames …still mulling it over..we will see. 😉