This one was done in 2012. I purchased a casting that Paul Spradlin (68customs) had done the cut work on previously. I did some shaving and massaging inside and out of body before coating with multiple layers of candy flames. I also did the side edges of flame cuts by hand with process blue to give it an outlined appearance.
Then the chassis…lots of work on that part! Parts were used from 7 different castings/brands to get what you see here. A LOT of hand molding as well to mesh everything together smoothly. The original chassis was utilized but the bottom was milled flat where stock exhaust and drive train were, and a diamond plate piece was fitted into its space and epoxied in place. The dash is from a Bigtime Muscle Charger and the seat is from a Maisto.