Coming up soooooon! Spectraflame Deep Blue passion/merc with two layers & colors of candy flames! Detailed base..head AND tail lights painted on..white wall RR’s!
Category Archives: KBs Sneek Peeks
In process pics of KBs creations!
Stretched Merc..in process..post clear stage!
Here’s a peek at the stretched merc coming up. This is post clear stage as all moving panels had to be removed or risk bridging gaps…which is not a good thing! So now…the task of sanding/polishing begins. Followed by assembly. Im looking at several days before its done…but…with any luck and no sand thru incidents…she will be ready sometime, late, this coming weekend. Stay tuned!!
Peeeek! – 1of1 Custom Convoy!
Quick peek at a multilayer flames custom convoy…one of one…detailed out!! She is a sweet one! Coming SOON!
Blue Blazes 4×4 chassis mod and details
Here is a side by side comparison of a stock silverado 4×4 chassis and the one I’ve just finished for the Blue Blazes edition one of one. Smoothed and polished bumpers, grill, side steps, front and rear axles/differentials, plus hand painted blackout chassis and drilled exhaust tips. Of course the most notable mod is the custom made rear drive shaft! Old solid block style “shaft” was drilled/cut/removed and ground very smooth so as to not catch the eye. Then two holes were drilled in chassis where the drive line should attach. Stainless steel tubing was cut to length and ends beveled/polished. It was then mounted using brass rod in each end. The tension holds the shaft extremely stable but still was given a drop of epoxy for lasting results.
Final Peek…Blue Blazes 4×4 Silverado
Think its done except some details…will see while I get some others ready. 4×4 chassis.
Process Shots : Blue Blazes FIRE!!
How about a rare peek at my Blue Blazes FIRE technique??
Ok…you got it! lol
STEP 1 ~ loose fire added and coated with candy blue.
This layer is the first one and is eventually going to be more of a glow or background when subsequent layers are applied. So it is done loosely, mostly freehand with the nozzle of the airbrush tilted at a 45 degree angle, blowing towards the rear of the casting.
STEP 1 ~ loose fire added and coated with candy blue.
This layer is the first one and is eventually going to be more of a glow or background when subsequent layers are applied. So it is done loosely, mostly freehand with the nozzle of the airbrush tilted at a 45 degree angle, blowing towards the rear of the casting.STEP 2 ~ Starting to add tighter, more defined fire licks.
Now I begin adding tighter defined licks with a mixture of AutoAir Wicked detail White, Transparent Base and High Performance reducer. Its almost a milky looking liquid. 2 drops of Detail Blue wicked is added to the mix when in airbrush. I am using a Badger Sotar for this step and HotDawg stencil from FlameMasks.com to create the fire licks.
Now I begin adding tighter defined licks with a mixture of AutoAir Wicked detail White, Transparent Base and High Performance reducer. Its almost a milky looking liquid. 2 drops of Detail Blue wicked is added to the mix when in airbrush. I am using a Badger Sotar for this step and HotDawg stencil from FlameMasks.com to create the fire licks.
STEP 3 ~ More licks added.
Adding more fire licks. Notice these licks generally are inside the confines of the first layer but do not follow it completely. The first layer also acts as a “road map” of where the fire will go on in subsequent layers..
Adding more fire licks. Notice these licks generally are inside the confines of the first layer but do not follow it completely. The first layer also acts as a “road map” of where the fire will go on in subsequent layers..
STEP 4 ~ Fire licks of layer 2 are completed.
And the last of this layers fire licks are done. Notice these licks while more defined than the previous layer, are still a bit wide and loose. This is how each layer should progress. Each layer becoming tighter and more defined than the last while still not following the same paths exactly.
And the last of this layers fire licks are done. Notice these licks while more defined than the previous layer, are still a bit wide and loose. This is how each layer should progress. Each layer becoming tighter and more defined than the last while still not following the same paths exactly.STEP 5 ~ Erasing and defining the licks.
I used a trans parent black to define and “erase” unwanted licks or areas of the 2nd layer fire licks. This should be done with care.
I used a trans parent black to define and “erase” unwanted licks or areas of the 2nd layer fire licks. This should be done with care.
STEP 6 ~ 2nd Layer completed with a few coats of candy blue.
This is the final step for the second layer of fire. Candy blue is applied in several light layers fading from dark to very light towards the front. More layers of candy are applied at the rear than the front, creating a fade in the color.
More layers will be added (usually about 5 to 6 total} after this. Each getting more and more defined than the previous layers. The final two layers should be adding a lot less new licks, but rather add to existing licks. Thise should be small areas where the fire would be the most “hot” if it were really burning. In the last couple layers, remember the old saying “Less..is MORE.”
This is the final step for the second layer of fire. Candy blue is applied in several light layers fading from dark to very light towards the front. More layers of candy are applied at the rear than the front, creating a fade in the color.More layers will be added (usually about 5 to 6 total} after this. Each getting more and more defined than the previous layers. The final two layers should be adding a lot less new licks, but rather add to existing licks. Thise should be small areas where the fire would be the most “hot” if it were really burning. In the last couple layers, remember the old saying “Less..is MORE.”
Tribal flamed 1 of 1 Drag Bus..in process peek!!
Fresh Tribal Flame designs tested out on this one. Has multiple colors of candy and pearls, and some multilayer flames nestled in the middle of roof tribal licks.
Fades from Tangelo Pearl to Tangerine Candy over pearl silver on sides. Top goes from light purple to medium blue candy, to Cobalt Blue candy.
I may be adding some more flames …still mulling it over..we will see. 😉
Stretched Merc Limo Gets Some Candy Color! -WIP
Well I’m not quite done with it yet, but thought I’d give you a peek at the stretch merc. She has some semi ghosty tribal flames freshly designed I might add! Pearl and chrome base coats for the candy tangerine, red, to purple fade.
I have some ideas for a layer or two of candy pagan gold flames …we will see. But for now..I’ve got some pretty colors to build upon!
More soon 🙂
BadBat-mobiles done and almost ready to go!!
I finally got all the BadBat-mobiles completed.
There will be at least TWO available as SINGLE purchase.
These will have special clamshell packaging.
Heres a couple pics of final product.
Watch for the sale link today/tonight!!
What in the BLUE BLAZES? In Process
These are not ready to fly yet but thought I’d give you a peek at the EARLY stages of my “blue blazes” realistic fire technique on 1/64th scale. Custome mixed pale blue for the base color flames followed with candy blue and red for a slightly darker fade. All airbrushed with combinations of my Hot Dawg..Kb Fire 2…and tradition flame stencils.
The willys is getting its SECOND layer of fire licks while all others are shown in the first application layer.
More to come soon.
